T&T: Washers and Contact Cement

Tom Theobald tommtheobald at gmail.com
Sun May 3 15:31:01 EDT 2020

On Sun, May 3, 2020 at 12:00 PM Rudy Sechez via Trawlers-and-Trawlering <
trawlers at lists.trawlering.com> wrote:

> ... why use not simply use grease to hold the washers in place?
> ----------------------------------------------------------------------------------------
> I often do, but in this case, I don't have a glue gun and I wanted the
> washers to remain in place, no slipping, even when the pump is removed in
> the future. With contact cement, tightening down the fasteners would allow
> the washers to adhere even better, since the sleeve, which is actually a
> compression post pushes against the washers that I wanted to keep in place.
> But the short answer is that it's what I had onboard. It's good to see that
> you guys are reading this stuff.
> *Rudy & Jill Sechez *
> *BRINEY BUG-a 34' Sail-Assisted Trawler   *
> *Anchoring Consultants-trawlertrainingabc.com*
> *850-832-7748 *
> *Georgetown SC Northbound-Chesapeake*
> _______________________________________________
> http://lists.trawlering.com/mailman/listinfo/trawlers_lists.trawlering.com
> To unsubscribe or modify your subscription options (get password, change
> email address, etc) go to:
> http://lists.trawlering.com/mailman/listinfo/trawlers_lists.trawlering.com
> Trawlers & Trawlering and T&T are trademarks of Water World
> Productions. Unauthorized use is prohibited.
Tom M Theobald
Anchored Payson AZ

More information about the Trawlers-and-Trawlering mailing list